megaraid_sas 0000:02:00.0: Failed to init firmware megaraid_sas 0000:02:00.0: 64 bit DMA mask and 32 bit consistent mask megaraid_sas 0000:02:00.0: FW now in Ready state raid6: using algorithm avx2x4 gen() 26578 MB/s Modules linked in: crc32c_intel ahci libahci xhci_pci(+) aesni_intel libata xhci_hcd megaraid_sas(+) aes_x86_64 crypto_simd cryptd glue_helper nvme usbcore scsi_mod ixgbe(+) nvme_core dca i2c_piix4 usb_common mdio megaraid_sas 0000:21:00.0: Failed to init firmware megaraid_sas 0000:21:00.0: 64 bit DMA mask and 32 bit consistent mask megaraid_sas 0000:21:00.0: FW now in Ready state megaraid_sas 0000:21:00.0: Waiting for FW to come to ready state it does not list the "modules linked in:") The dmesg of debian 9 box is less verbose for raid (e.g. Please see the second dmesg output from my desktop with the PERC card. However, loading them, rmmod and modprobe megaraid_sas did not resolve the "Failed to init firmware". I just realized that modules sg and sd_mod are not loaded on debian 10. Should I compile a megaraid_sas driver? How? (I am a biologist, doing compiles for hardware/system very rarely last time approx 10 years ago).However, it is strange that nobody seems to have this problem with debian 10 (based on google searches). I have the feeling that I should submit this phenomenon as a bug. Now I tried this in my desktop, and exhibit the same problem (failed to init firmware). May be important information: I also have a spare PERC H310 (it is the same LSI, 1000:0073), which worked during the summer before upgrading to debian 10. Replacing the card made me restart the server and possibly a newer version of the module was loadad. I think that I made an upgrade during the fall without a restart. It is working without any problem on debian 9. trying the card in my desktop with debian 10), when finally I inserted the card with a disk into an old desktop with debian 9 installed. "Failed to init firmware" - see the dmesg output below. The new card of the same type is recognized (lspci), but the disks are not. The card failed, I got a replacement, the server was restarted. It was in a supermicro server and worked without a problem from the summer - debian 10 was installed. LSI MegaRAID SAS 9240-8i, LSI Logic / Symbios Logic MegaRAID SAS 2008 (rev 03) I am using an LSI card supperted by megaraid_sas with SAS disks in JBOD mode and software raid.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |